Pest Control Kuala Lumpur
Termites have got a useful role in the environment, however, when they invade and attack your home, they can become a hated enemy, a source of heartache and anxiety. Every problem features a solution, and there is no need for any job turning into a nightmare. You will find however, certain practices in the pest control industry that ought to be adopted for all inspections and treatments, plus some “dodgy” operators that needs to be avoided such as the plague!
In Malaysia, one house in three at some stage will become affected by termites, which is more prevalent than damage caused by fire, storm and flood combined. This information will examine ways to avoid termite attack, ways of inspection, protection, control and treatment.
Termite Control –
Charge of pest termites involves identifying the species, choosing the nest and choosing the best eradication methods. A combination of doing regular, competent building inspections in termite-prone areas, using naturally resistant or treated timbers in buildings, and installing chemical and physical soil barriers around buildings is essential to avoid further problems.
Houses nearby may usually have termite nests nearby in trees, stumps and underground however these may not contain pest species. Once they do, it ought to be the target of the termite control technician to find and treat these areas before any protection is implemented. Too frequently the technician will “advise” the worried homeowner that termites might be “anywhere within 100 metres” of the property and its impossible to pinpoint specifically where they could be originating from.
In my opinion, in the event you don’t even look for the origin from the problem, your chances of gaining control over the issue dramatically drop. Whether or not the property is surrounded by dense bushland, I believe it is definitely worth the time and cost of test drilling and treating ALL trees and stumps around the property in a 50-100 metre radius, because which is where most infestations originate. When it means drilling 40-60 trees or investigating all surrounding homes, isn’t that a lot better than ignoring a likely source of infestation?
Most pest control companies is not going to visit this extra effort, and definately will attempt to convince your client their baiting technique or soil barrier system is made to protect your home in most circumstances. DON’T BELIEVE THEM! Better investigations and inspections cause better termite protection and treatments. Its only good sense to take all effort to discover the foundation from the attack.
Termite Inspection of Pest Species –
Termite identification in Malaysia is very specialized and pest controllers must thoroughly inspect every area in the property before any protection or treatment is begun. This might be conducted with the following equipment:
Flashlight with bright light – This is essential and krypton bulbs give the best light for torches generally on the market today. LED torches, headlamps and flashlights would be the next generation inspection tools and must be applied once they come on the market.
A termite sounding donger – A fiberglass rod with a small plastic ball in the end. It is made to run along skirting boards, higher placed timbers along with other exposed timbers. In the event it runs across termite infested timber the tone changes, indicating hollowed out timber.
A Moisture Meter – It is designed to pick up high moisture content in walls and timbers. Termites talk about moisture from the soil and to the walls and timbers.
A Termatrac microwave tracking device Termatrac is actually a breakthrough development in the building inspection detection of termites, invented and developed in Malaysia using technology similar to radar, Termatrac will be the exciting solution to detecting termites through timber, plaster board, brick or masonry without interference for the building material or termite activity. With no drilling, tapping or prodding, Termatrac is the solution to termite detection without termite defection! With Termatrac, the pest professional enjoys the main benefit of accurate detection and customer satisfaction.
Box cutter & Tape – If termite infested timber is found, we could make the grade using a “Stanley” knife and expose the inside of timber, identifying the varieties of termites then seal it backup with tape so as to not disturb the termites.
Listening Device – This listens to termite sounds inside the internal of the walls. However, should you tap the wall together with your hand and place your ear approximately the wall it is possible to hear the soldier termites communicate by tapping their mandibles to the timbers.
Home Inspection – A home inspection for termites is famous in Malaysia as a building inspection and includes a pest report as well as a building report. It involves a thorough visual inspection from the sub floor, roof void interior, exterior, and other areas of the house. A typical house takes from 1 to 2 hours to finish. Cost is different from $160-$360 depending on the size of your home and access. This really is including G.S.T. Tax
The report includes multiple pages setting out the areas of concern and what to do to rectify problems. Digital photos can be found upon request. Please remember a termite inspection report is made to detect termites with an early stage regarding reduce the quantity of damage to your home. It can not stop termites. It is strongly recommended a termite inspection report is conducted at least once every twelve months and each three to six months for high risk areas. Note: There is absolutely no household insurance that covers you for termite damage.
Termite Report Essentially a termite building inspection report is made to:
1. Detect old damage and active termites.
2. Provides you with the part of risk of infestation.
3. Offers you advice on reducing the probability of termite infestation.
4. Offers us enough information to accurately quote you on a termite treatment and also to use the best method.
5. Identifies species of termites and (most importantly)
6. Educates you about termites.
Economically Important Pest Termites – Out of the 258 described termite species in Malaysia, just a few timber-damaging species are of concern to us. The five families that include the most frequent pest species in Malaysia are:
1. Mastotermitidae (1 pest species – Giant Termite, Mastrotermes darwinensis)
2. Kalotermitidae (several pest types of ‘dry-wood termites’, including the introduced Cryptotermes brevis)
3. Termopsidae (1 pest species – Dampwood termite, Porotermes adamsoni)
4. Rhinotermitidae (7 pest species, including Coptotermes acinaciformes)
5. Termitidae (5 pest species, including Nasutitermes walkeri)
The Giant Termite (Mastotermes darwinensis) has the greatest potential for destruction. However, it is actually limited to the tropical regions of northern Malaysia. It attacks any wood in contact with the floor including jheajy and trees, as well as paper, leather, clothing along with other materials. It really is a large-bodied primitive species that typically forms small colonies and it has no true worker caste.
West Indian Dry-wood Termite – The introduced West Indian Dry-wood Termite (Cryptotermes brevis) is considered to be the world’s worst termite pest as it can certainly eat even really small timber objects with few external signs of damage, can quickly take over from native termite species, can survive in quite dry conditions, and it is easily transported. Should it be found, it ought to be reported towards the relevant government authority. This has been seen in Brisbane and Sydney, along with other areas on several occasions.